“Very informative, the instructors expressed a willingness to assist with any field situations that might be faced and provided a forward path for educating the community in this new found bio-hazard.”--- wrote Michael J. Magazzu, All Points Inspection, (Mobile, Alabama), on his class evaluation form June 21, 2003

“Hands-on equipment & procedures approach to testing and remediation, coupled with comprehensive discussions of proven treatment methods with EPA registered compounds is invaluable. Well presented and attention stimulating presentations.”---wrote Joseph J. Magazzu, All Points Inspection, (Mobile, Alabama), on his class evaluation form June 21, 2003.

“The course is excellent in that it offered both hands-on and written information with practical examples and workshops. The tools presented to the class are modern and easily understood in operation and application. Methods of marketing presented are very useful. I’m sure to promote our expansion into this field.”---wrote Mike Aburto, Twining Laboratories of So. CA, Inc., (Long Beach, California), on his class evaluation form June 21, 2003

“I would have no career in the mold field without this course. This information will enable honest people to truly fulfill their “American Dream”. The atmosphere is very conducive to good learning.”---wrote Art Buskirk, Coral Sea Enterprises, (Ligonier, Pennsylvania), on his class evaluation form June 21, 2003

“My understanding of the “Mold Scare” has improved 100 times as a result of this training! Once skeptical – now convinced.  I am motivated to accept the challenge of improving IAQ and educating others.”---wrote Randall Wilson, (Laporte, Texas), on his class evaluation form June 21, 2003.

“Offered good insight to mold inspection and remediation. Gave tools to start working in the field and become an expert.”---wrote Jeff Jensen, Rocky Mountain Home Inspections, (Ogden, Utah), on his class evaluation form June 21, 2003

“Excellent beginning to the familiarization of mold investigating & remediation.  The instruction was fun and informative. Learned enough to start on what can be a very lucrative field of professional health care for the home environment.”---wrote Donald Zobe, The Mold Buster, (Pocatello, Idaho), on his class evaluation form June 21, 2003

“I learned so much. Paul was extremely good with his presentation.”---wrote Greg Williams, Roof & Air Redeemers, (Memphis, Tennessee), on his class evaluation form May 17, 2003.

“Excellent.”---James Dunworth, (Stuart Florida), on his class evaluation form May 17, 2003

“Some of the best hands-on training in the industry today.”---wrote Dennis Blackman, Mold Inspector’s of Maui, (Kihei, Hawaii), on his class evaluation form May 15, 2003

“It gave me an excellent perspective of how dangerous mold can be and a much better understanding of the testing and remediation process. I am confident that I can open my business and your support will be fair and professional.”---wrote Bill Kick, The Arees Co., (Raleigh, North Carolina), on his class evaluation form May 17, 2003

“Very informative. I feel like I learned quite a bit about mold inspection and remediation. I look forward to my new career. I really think a lot was accomplished in three days.”---wrote Jim Ricks, (Ormond Beach, Florida), on his class evaluation form May 17, 2003

“Great seminar and I will be looking forward to apprenticeship program at CMICI. Thanks for all your hard work.”---wrote Edward J. Blumlung, (Troy, Michigan), on his class evaluation form May 17, 2003

“The “ephyae” of knowledge and resources made available, combined with the hands-on experience will provide me with a “colony” of knowledge to prepare my own professional inspection business. I am leaving here confident that I can perform a valuable, honest service for my customers.”---wrote Dana H. Scarborough, A Air-Care of Oregon, (Toledo, Oregon), on her class evaluation form May 17, 2003

“Very informative. I like the fact that Paul demands honesty in this business. Very helpful ideas for marketing plans.”---wrote Timothy L. O’Neil, Assured Mold Inspectors LLC, Redmond, Oregon, on his class evaluation form May 15, 2003

“The course was informational in all areas of mold inspections and abatement, as well as marketing.”--- wrote Steven Michelucci, Assured Mold Inspections, (Redmond, Oregon), on his class evaluation form May 17, 2003

“It really boosted my confidence in what I was already doing and many new ideas that I know will improve my effectiveness in mold remediation.”---wrote Nick Kangles, (Bakersfield, California), on his class evaluation form May 17, 2003

“Informative. Not knowing anything to speak of when I came, I feel the course helped my understanding. The knowledge I have will be a stepping stone to launch a new company that will benefit many people.”---wrote David Gardner, Mr. Journeyman, (Clawson, Michigan), on his class evaluation form May 17, 2003

“I found the information, materials, and teaching methods to be excellent. The hands-on training is invaluable to understand proper methodologies and solutions to mold problems found in the field.---wrote Bill McGloghlon, AHCI, (Orange, California), on his class evaluation form May 17, 2003

“Very good. A lot of information was pack into the 24 hours of class time. The overall subject were covered well with just enough time spent on the different areas of inspection, remediation, and final clearness testing.”---wrote Jay Smith, Center for Indoor Mold Solution, (Orange, California), on his class evaluation form May 17, 2003

“The teaching regarding inspection was particularly good.”---wrote Tom Schultz, (Minnetonka, Minnesota), on his class evaluation form May 17, 2003

“The safety and mold remediation techniques are very useful for the furtherance of my business. Also the inspection techniques will be helpful.”---wrote Thayne, Anderson, (Littleton, Colorado), on his class evaluation form May 17, 2003

“I thought it was very useful. Paul was upbeat and gave good personal accounts of past and present jobs. Ryan was also very knowledgeable. Great job.”---wrote Jonathan Cich, (Minnesota), on his class evaluation form May 17, 2003

“You did a good job emphasizing safety and on helping us see where we can make money. You have given us resources for future help.”---wrote Brad Machlin, The Arees Company, (Fort Mitchell, Kentucky), on his class evaluation form May 17, 2003

“Very good hands-on.”---wrote Bill Irvin, WTI Environmental Services, (San Clemente, California), on his class evaluation form May 17, 2003

“I find it very helpful and much better understanding.”---wrote Greg Bowers, (St. George, Utah), on his class evaluation form May 17, 2003

“Very informative. Hands-on experience put all info together.”---wrote Larry Stegman, Drees Custom Homes, (Sherman, Texas), on his class evaluation form May 17, 2003

“Answered a lot of questions. It will help me get started in mold inspection.”---wrote Glenn Hayes, Pro-Live Builders, (Pembroke Pines, Florida), on his class evaluation form May 18, 2003

“Good. Give me the information needed to start a career in mold inspection and or remediation.”---wrote Mike Swalboski, Scarcely, Ltd., (Marshall, Minnesota), on his class evaluation form February 22, 2003

“Very informative about something that has just started to get in the mainstream.”---wrote Pedro Izquierdo, Pro-Line Builders, (South Florida), on his class evaluation form February 22, 2003

“Outstanding. It was my pleasure attending such a professionally run school.”---wrote Rick Van Tiem, Clean Indoor Air Solutions, (Las Vegas, Nevada), on his class evaluation form February 22, 2003

“Very informative session. Not one question left unanswered. The information given to me by Paul and Ryan left in me awe about the world of mold and all the health hazards associated with mold.”---Led Simpson, Superior North Contracting, Inc., (Thunder Bay, Ontario, Canada), on his class evaluation form February 22, 2003

“A very good learning experience.”---Mike Vasquez, Top Shelf Enterprises, Inc., (Cheyenne, Wyoming), on his class evaluation form February 22, 2003

“The class is very informative and also very hands-on. I am very positive about this seminar and its future information. I will definitely be going into business and will also be keeping in contact.”---Milan Wolgamott, Inspection Specialist, (Merritt Island, Florida), on his class evaluation form February 18, 2003

“Very informative. Useful info. Learned a lot. Ready to go test with confidence.”---Douglas Ulery, (Cobb, California), on his class evaluation form February 22, 2003